How salt works after activation by runes. How to activate runes

Hello! For runes to begin to be useful, they must be charged and given the right direction. Every person who wants to use ancient signs to achieve their goals should know how to activate runes.

How to connect with runes

For ancient signs to work, it is necessary to activate them, that is, to correctly attune them to a specific person, to encourage them to act in the right direction.

Individual or runic scripts need to be activated only once. If these are protective amulets, you will have to recharge them every 2 months.

The runic formula that has fulfilled its effect must be thanked.

With signs applied to it to ward off misfortunes, it is also charged every 2 months.

Symbols on the body are subject to activation, which is carried out with each writing.

How to prepare for recharging

To configure runes for their further action, use 4 Elements.

Prepare dry herbs or incense. These can be dried flowers of immortelle, yarrow, chamomile, sage, incense or amber.
Buy white, red, green, blue candles. To attract money, good luck, and success in business, you will need a red or green candle. For healing - a blue candle, for harmonizing personal life - pale green or pink.
Large without additives.
, which stood in the house for 3 hours.
A white cloth laid on the table, on which all the objects for the action will lie.

Elemental activation

Encouragement to action through Air.

Light the herbs or incense, then extinguish it to create smoke. You can set it on fire in a regular spoon.
Next, fumigate each rune or talisman with the signs written on it.
Read the Disclaimer:

“I (Name, Last Name) activate the runic formula with the element of Air, (for example) to attract wealth”

The continuation is written below in the text.

The action takes place alone.

Attracting the element of Fire:

Light it up.
Hold the rune or object on top of the flame for a few seconds.
To charge with fire, read the Disclaimer:

“I (Name, Last Name) activate the runic formula with the element of Fire to strengthen, for example, my feminine (male) strength”

Attracting the element of Earth:

Sprinkle salt on runes or objects, focusing your thoughts on your intention.
Read the Disclaimer:

“I activate the Fehu rune with the Earth element for my rune set”

Used salt should be poured under the tree.

Attracting the element of Water:

Spray plain tap water (holy water should not be used) on objects or symbols.
Read the Disclaimer as in the previous examples.
Water your indoor flowers with the remaining water or pour it under a tree.
Don't forget to activate the symbol bag!

Quick activation method

The most affordable way is breath!

Place the rune script or object on your left palm.
Fold your right palm into a tube.
Take a deep breath, focusing on your intention.
Exhale through your cupped palm.
The air should hit the object lying on the left palm.
If desired, say the Disclaimer:

“I activate the runic script to protect my business (name) from the effects of any harmful forces and energies”

Can be charged with ice. Fill the leaf with the runic link with water and freeze it, saying the words written above.

Secrets of Charging Symbols

Only formulas or ligatures are activated by fire.
Fire Charge Danger: Can't be taken back even if you change your mind.
Before charging, place an amulet or a bunch of runes under your pillow for 3 nights to understand whether you really want this particular desire to come true.
applied with a pen or oils to the body, activate with your breath after each application. Draw them on the surface of the water in any container while reading the Disclaimer. Spray the inscription with water, then drink the water slowly.
A simple way to give action to formulas is to write them on paper: on one side of the sheet write ligature, and on the other side the name and surname of the person for whom the work needs to be done. Then charging is carried out by using one of the elements. A person should have the runic script with him for 2 months, then thank him and burn it.
By breathing - you can attract abundance, money into life, protect yourself and your home.

If neurosis or other unpleasant phenomena appear after activation, then the work has begun. After three days, the condition should return to normal.

Cleansing the amulet

In order to have protective power, they must be periodically cleaned and charged. Many amulets are made of stone or metal.

The easiest way is to clean the protective item in running water. Place it under water and say:

“Water washes away the troubles and misfortunes taken by the amulet, protecting me!!!”

After that, wipe it with a napkin and place it in the sun for about 30 minutes.

Can be cleansed fire: pass the amulet over the candle flame several times from right to left, then in the opposite direction. Mentally imagine how negative energy turns into smoke. For a deeper cleansing, say out loud:

“The flame burns away negativity, and all my misfortunes turn into smoke and disappear”

The candle will have to be thrown away.

If the sun is shining outside, then place your defender under its rays. This way he will be well charged with clean energy.

If you wear the amulet in plain sight, it will collect all the negative energy from strangers and reduce its protective function. Place it in salt and leave for 3 days. After completing the ritual, the salt must be thrown away. The room where the ritual was performed must be fumigated with sage smoke.

How do you know if it's cleared? If there is no negativity on it, then you will immediately feel incredible confidence in yourself. If such a feeling does not arise, the cleansing will have to be repeated, and then not touched for 24 hours.

When the moon comes out in the sky, place the item on the windowsill.

Read the following:

“I call on Mother Moon, I appeal to her for help! Let him give strength to my amulet for good and good deeds! I’ll look at the moon at night and thank her with my gaze!”

Correct deactivation of runes

It is important to know how to deactivate runes correctly so that they do not bring trouble. If the runes are depicted on paper or photos, then they should be burned with gratitude for the work done. If you put a photo with a formula on your page on your computer, then delete it with gratitude.

And it is best to indicate in the Agreement the specific validity period of the ligature or stav.

“The formula works without harm to the physical and mental health of me and my loved ones. I can cancel this formula at any time.”

In general, any action that destroys runes stops their operation.

Dear friends, you have learned even more about the action of magical symbols. To use them or not to use them is up to you!

Questions from newcomers poured in, are pouring in and will continue to pour in, and they are all of the same type. Therefore, this is another article among many other articles, other practitioners, which will answer the typical questions that all beginners ask. Where to put runes? In fact, you can apply runes anywhere; the runes, in fact, don’t really care what you apply them to, because the runes work by intention, the base is only needed by the operator to make the work easier. But there are some exceptions to this rule, when it comes to talismans/amulets, then the base will matter based on their nature of material. There are several popular carriers for staves:

Photo is the most popular base for application. Which photo to choose is the one that seems suitable to YOU PERSONALLY and helps you in your work. If the effect is on one person, and the photo is group, it is better to remove all other people and animals from the photo in any available way (cut with scissors and paste on white paper, cut in Photoshop, erased in Photoshop, painted over, etc., etc.). ANY studs can be applied to the photo (unless otherwise specified by the author in the description of the staves). All bets are applied on the front side

Cucumber - if there is no photo, you can use a schematic image of a person, which practitioners call a “cucumber” (from “stick-stick cucumber, here comes a little man”), you can give it the features of an object, you can add the name, date of birth and any other information on operator's discretion. ANY studs can be applied to the photo (unless otherwise specified by the author in the description of the staves). All bets are applied on the front side

Description paper- most often, statements aimed at a situation or statements that for some reason should not be applied to a photograph or cucumber are applied to paper with a description. All bets are applied on the front side

Body - temporarily (with a pen, felt-tip pen, cream, oil, saliva, etc.) you can apply any staves (unless otherwise specified by the author in the description of the stave) aimed at acting on the subject on whom the stave is drawn, or staves aimed at situations and other objects , associated with the subject on whom the stave is applied.

I have a good attitude towards runic tattoos, but nevertheless I do not recommend them for beginners, since in order to get a tattoo you need good diagnostics, a master who can apply a tattoo under certain conditions, the ability to work with runes and staves, individual selection and preliminary tests in the form of temporary application for a long period, etc., etc. It is traditionally believed that staves that affect the subject himself are applied to the left side, and staves that affect others are applied to the right side. Practitioners choose the location of the stave on the body independently, some draw in such a way that the top of the rune is directed towards the head, some vice versa towards the legs, some sideways - everyone is looking for the method that will work best for themselves. The visibility of the stavs on the body is not important (unless specifically indicated by the author in the description), only the hassles of direct impact (= action only when the object saw the formula) should be located in a visible place. An alternative to applying it to yourself is to apply the stav to a patch and attach it to the body.

Items - various stakes that will be used as linings, tosses, etc.

Cosmetics, creams, shampoos, etc., etc.- focus on beauty, health

Water, tea, liquids, food, etc.- bets on beauty, health, bets that will be used as drink, feed, gravy, etc.

Various materials- any natural materials can be used, based on their magical and energetic properties, suitable for the tasks of the talisman/amulet being created. Typically, long-term or repeated exposure stains are applied to such media, simply because it is more difficult to apply to metal, stone, wood, etc. than to paper, but if the operator wishes, absolutely ANY stains can be applied to the media (unless otherwise specified by the author in the description of the stakes). The only difficulty in working with bets on such media is because... the work is carried out in two related areas of magic (graphics + talismans) - the need to observe various subtleties and calculate the time, moon, days, etc., etc., inherent in the technology of making talismans, which can be avoided when applying runes to other media. To check the functionality of a long-term formula, you can first activate the stav on paper (without a photo, cucumber, signature) and use it as a talisman; if the stav works satisfactorily, the stav is transferred to a permanent medium.

Volt - volt is used in runic magic ONLY if there are connections to the object of influence (biomaterial, things). If there is only a photo of the bindings, creating a volt is pointless - the staves are applied to the photo. Before applying staves, volts must be created and animated according to the rules.

Candles - ANY staves can be applied to candles (unless otherwise specified by the author in the description of the staves) of short-term action (while the candle is burning) and which need long-term feeding with the energy of fire. As well as staves for recharging other staves through a candle. The back of a photograph, a cucumber, any other medium, a separate envelope, box, etc. - unless otherwise specified by the author in the description of the staves, staves are applied to conceal the impact, blindness, fastening and protection for work, energy, accelerators

How to apply runes?

Whatever you want. How convenient. What do you like? Any colour .

PRINT OR DRAW BY HAND? Ideally, all bets are placed by hand, regardless of their complexity. This shows how important the operator is to what he does and what he wants to get and how invested he is in the process. Small staves (up to 10 runes), which are simple and easy to disassemble, as well as staves that definitely need a runic clause (unless otherwise specified by the author in the description of the staves), it is better to draw by hand. Large and complex staves and ligatures can be printed on a printer (unless otherwise specified by the author in the description of the staves) and then traced along the lines (hint: take a marker with a thickness of 0.1, then any even super-thin lines will be drawn accurately).

HOW MANY STAKES CAN BE APPLIED AT THE SAME TIME? Yes, at least three hundred. If you pull and if there is no conflict between them. Experience says that it is extremely difficult to connect more than 7 staves for one target on one object/situation so that they do not interfere with each other, do not conflict or spoil the impact, and then this complexity increases exponentially, that is, by about the 11th stav it is is almost impossible now. The principle in quantitative selection should be “less is better”; it is better to place 1-3, maximum 5 bets on solving one problem than to put a lot. For one medium, no matter what it is (photo, cucumber, talisman, etc.), it is better to install one post plus, if necessary, one additional post on the back (see above, which posts are applied on the back).

How to activate runes?

Each practitioner chooses the method that suits him best and which results in the best results. A beginner has no choice but to try and experiment with different activation methods to understand and find the one that works best. If any special activation method is indicated in the description of a formula or stav, you must use this method or select another formula or stav,

There are several popular activation methods:

By fire - activation by fire is NOT activation by burning! When activated by fire, the carrier with the stave is held over the source of fire, filling it with the energy of this element, but is not burned. If during such activation the stave itself was accidentally damaged (a piece of the stave burned out, a hole formed in the stave, etc.), the stave must be deactivated and reinstalled, handling the fire more carefully.

By burning - used for staves that do not need to be deactivated. Where to put the ashes after burning - throw them into the wind, into a river, the sea, bury them, etc., etc. You definitely shouldn’t throw it down the drain or in the trash.

Elemental activation- you can do it all, you can do it several, at the discretion of the operator. When activated by the elements, the wearer with the stave somehow comes into contact with the elements being used.

Breath activation- can only be used for positive bets. You cannot activate porcel staves by breathing. It is not recommended to activate staves for others with your breathing that are not aimed at a joint action and at the operator.

Activation by blood- can be used ONLY for positive bets. It is not recommended to activate staves for others with your blood that are not aimed at a joint action and at the operator. There are beliefs circulating online, bordering, in my opinion, on trolling, that since the primary sources indicate that damage was done with blood, it is possible to do so now. Such information is indeed in the primary sources, but it is important to remember several points: 1) the eddas, sagas and legends are not a textbook on magic with all the details and subtleties of work, 2) the information in the primary source could be distorted in order to give greater power to the images, in order exaltation, as well as due to ignorance or deliberate confusion 3) time moves forward, experience and knowledge are gained, not only in the exact sciences, medicine, physics, etc., but also in magic, something that was normal and natural for the 1st century AD It is also not always normal and natural for the 21st century; it is necessary to move forward and not degrade, denying experience, knowledge and real consequences from any actions.

Activation by intention - mental activation without the use of any other means, requires great skill and skill in working with intention.

Activation by time - it is stipulated that it begins to act at a certain moment or at a certain time. In addition to these methods, you can choose any other that seems acceptable to the practitioner and which brings him results.

How to deactivate runes

Deactivation of the stave (unless otherwise specified by the author in the description of the staves) can take place in any way convenient for the operator, based on the material of the stave carrier and the method of applying the stave, which MUST be specified upon activation. There are several popular deactivation methods:

Is blood needed? Saliva? Another biomaterial for activating runes?

Staves need blood, saliva and other biomaterial ONLY to bind to the operator (or to mark an object). Using blood in staves is NOT a sacrifice or gift to the runes! Such a binding is often necessary in double-directed spells (love spells, egilettes, sugar spells, etc.), where it is necessary to indicate the specific goal of an object or subject. They use their blood, saliva, and other body fluids only in actions where the operator himself appears. For others they do not use their own biomaterials. Their biomaterial is not used in damage, lapels, curses, any other negative effects, protection of others (including relatives), cleansing of others (including relatives), effects on third parties. I personally prefer the use of live blood (from a vein or artery) to all other biomaterials (hint: to draw blood, quickly and least painfully - use thin medical syringes or insulin injection needles for diabetics - they have a minimum needle diameter, it is easy and simple enters any place without leaving traces). Blood can be taken from any place, from any finger, from any part of the body (unless otherwise specified by the author in the description of the staves). It is also possible to use saliva, sperm, menstrual blood, etc.

So, you have decided to engage in runic art. You bought yourself a runic set and prepared well theoretically. But what next? What steps do you need to take to start working with them? Any experienced runologist will tell you that first you need to activate them. And only after that you can start practicing.

What is rune activation? Why is it needed? Any person who is interested in runes and wants to work with them buys himself a runic set. But before you start using them for their intended purpose, it needs to be charged and activated. Otherwise, the runes will not work as they should. Activation of runes is therefore one of those rituals that a beginner in runic art is introduced to. At the same time, the process of unifying human energy with the runes occurs. This contributes to a better understanding of runes. After all, behind all these signs there is a certain element, a certain deity. This is a whole small world with its own characteristics. And you need to know it in order to be able to use it.

Rune activation ritual

Now we’ll find out how to properly activate a runic set. To do this, you first need to place objects on the table that will represent the elements of Earth, Fire, Air and Water. Accordingly, this will be a bowl of salt (coarse), a burning candle, incense and a vessel with water. All vessels must be thoroughly washed before the ritual. Use a new wax candle for the ritual, that is, pure energetically. As for incense and incense sticks, place them on a stand in a vertical position. The symbols of the elements should be arranged like this: in the far left corner of the table - Fire, in the far right - Air, in the near left - Earth, in the near right - Water. And the center of the table will be intended for a runic set. It must be new. Do not use other people's runes under any circumstances. They should only be yours.

To perform the ritual, make sure that there is no one in the room: no other people, no pets. Turn off your phone (or at least put it on silent mode). In general, it’s better to lock yourself in the room from the inside. So the ritual begins. It is necessary to recharge with the energy of all four elements. To do this, you need to touch each of the symbols in turn or light it (candle, incense). At the same time, say the phrase: “I call upon the elements (Earth, Fire, Air, Water) into this circle to help me.” Your words should come out loud and clear. Now it's time to place the Elder Futhark runes in the center of the table. Moreover, the layout should be like this: three rows of eight runes each. The first row in turn from left to right will look like this: Fehu, Uruz, Turisaz, Ansuz, Raido, Kenaz, Gebo, Vunyo. Second row: Hagalaz, Nautiz, Iza, Elvaz, Pertro, Algiz, Soulu. Third row: Tivaz, Berkano, Eyvaz, Manaz, Laguz, Ingvaz, Dagaz, Otala. But the Odin rune should be placed in the fourth row in the center, below the other runes.

Now you need to focus on the runes, look at them carefully. After this, the activation of all runes begins in turn, starting with Fehu. To do this, take a rune and say its name (you need to know them by heart). Then we lower it into a container with salt and at the same time say the words: “I activate the Fehu rune with the energy of the Earth Element!” We pronounce the same words (only with a change in the name of the element) when we hold the rune over the flame of a candle, when we bring it to the incense, when we splash water on it. Now we take the rune in our left hand and say: “The Fehu rune is activated by my breath! Fehu, become mine and help me!”, while blowing on her through his right hand, folded into a tube. The last step should be repeated three times. And only then can the rune be put into the bag. All the same actions are performed with the remaining runes, including the Odin rune, which lay at the very bottom. By the way, you can change the pronounced words. The main thing is that their meaning does not change.

Now press the bag with the runes to the sternum (heart), close your eyes and imagine that now you and the runes are one. It would also be nice to say “thank you” to the elements for their energy, for their help in implementing the ritual of activating the runes. You can extinguish a candle only with your fingers; extinguish incense with water. All items that took part in the ritual must be removed immediately. After such a ritual, the rune reader must mentally promise himself to use the runes according to all the rules, not to give or give away his set to anyone. Thus, you will betray your runic set. And this can be fraught.

The entire ritual involves several forces at once. That is, the runes are simultaneously activated by fire, water, air and earth, as well as the runes are activated by the breath of their owner. This is all very symbolic: all forces have gathered to help the rune reader. But he himself is directly involved in this. Now your hands are untied. Now you can work with runes. Now they are completely at your disposal.

Here are some tips that may come in handy during the ritual:

Some authors and experienced rune scholars say that there is also activation of runes with blood (this can be included at the end of the ritual described above). The meaning of this action is the unity of a person with the runes. After all, blood is a symbol of kinship, close connection, sacred unity. Of course, whether to use this biological fluid or not is up to you. If you decide, you will need to injure one of the fingers and squeeze out a few drops of blood. Of course, there is no need to smear the runes with it. It is enough to hold them over the blood. However, not all rune experts recommend using blood. They think it's too theatrical and fake. Perhaps there is some truth in their words.

It is worth mentioning that there is no need to neglect the ritual of activating runes. This is not some useless fun. It's worth taking this seriously. It would be good to read more about the activation of runes in specialized literature. There are several types of rituals, but their essence and purpose is the same: to charge the runes with your own energy in order to feel them, so that they obey you and help you.

Runic activation. Blessing of runes with the elements of the earth.

Without proper knowledge how to activate runes That's right, you won't be able to use their wonderful magic. And no matter how you ask for help, the most ancient symbols will remain inaccessible to you. Activation of runes is a special procedure during which the signs used are tuned to a specific job and exchange energy with a person.

Before you begin this process, you must have with you a certain set of artifacts and, of course, knowledge. You can get them from special sources or ask for advice from a professional runologist.

Remember that working with sacred elements is not a game or fun. Learn what runes are, how to activate them, and. If you don't take them seriously, you risk getting what you deserve.

Article on the topic:

Ways to activate runes

So, when starting a magical ritual, tune in to a positive mood. Drop all negative thoughts and emotions. Believe that everything will work out for you.

You need to activate the entire rune set, and not just those symbols that will be used most often. The procedure is carried out only once - this is quite enough for rituals and fortune telling.

If you were given a rune talisman, it also needs to be properly activated. The same goes for tattoos. The usual one (in the form of stav or ligature) will not give you the desired effect.

There are several ways to activate runic signs - they are not complicated, but they require attention and serious attitude.

Here are the main ones:

using your own breathing;
using the internal energy of a person;
method using natural elements;
destruction of the formula.

And whatever method you choose for yourself, the procedure should begin with the words: “I activate the runes with natural energy... (indicate the force used).”

How to activate runes on paper

Plain paper is an affordable material that is always at hand. It can be used to activate sacred signs. Draw the required formula on one side and write your personal information on the other.

After this, you can use any convenient activation method:

if you want to change your life for the better, use the four elements method;
if you have conceived a grandiose plan and are completely confident in it, the method with fire will do;
if you need help with your health, the best option is a ritual with blood;
and the breathing method is suitable for those who want to attract good luck, money or social respect.

Next, fold the piece of paper into a small envelope and do not part with it for sixty days. After which you need to bury it deep under the roots of a young fruit tree or burn it in a fire.

Be sure to thank both the symbols and the Universe for your help.

It is quite possible that after the ritual you will feel some fatigue or dizziness - this is not scary. These are just signs that you have lost some energy. Now we need time to recover. A couple of days will pass and your condition will return to normal.

Activation of runes on the body

By depicting runes on the body, people expect protection or other magical help from them. But not everyone knows that to begin with, all symbols need to be correctly activated. You should know exactly how to activate the rune formation that the tattoo depicts.

Runic marks are applied to the body using a pen, paint or aromatic oils. Some also use tattoos - this is a more serious way.

It is best to activate the rune on any part of the body with your breath. If this is physically impossible to do (for example, the drawing is on the back), then you will need a glass of water.

Say while standing over him:

“I ask water to help me strengthen the magic of the runes on my body.” .

After this, drain the glass to the bottom.

How to activate runes with fire

This technique is very powerful. If you spend it, there will be no turning back, so think several times about what exactly you want to take from the runes.

Draw the required signs on a piece of paper and place it under your own pillow. Store the drawing in this place for three days. Do not look under the pillow during this period - do not violate the sacrament of the ritual.

Then take the runes and go to a forest clearing (or any secluded place). Build a fire there and burn paper with thoughts of what you want.

Do not put out the fire under any circumstances! The fire should burn out on its own.

If you don’t have the opportunity to make a fire outdoors, you can use a regular candle. But know that after such a ritual you will need a long time to restore energy balance.

Activation of runes by elements

To perform this ritual you need to prepare in advance:

Air. You will need a set of dried herbs. Commonly used are chamomile, helichrysum, frankincense or yarrow.
Fire. You can’t do without an ordinary candle. Its color depends on your desire. If you are looking to attract good luck, use a red candle. If you are concerned about health problems - blue. Pink is suitable for solving love issues. A white candle is considered universal.
Earth. Stock up on a pack of salt.
Water. And, of course, the ritual will need water - this is a mandatory ingredient for almost any magical ritual.

Place cards with images of runes and all prepared items on the table.

The first stage is activation using the air element. Light the herbs and let their aroma spread throughout the room. Pass the smoke over each symbol and say:

“I activate the sacred formula to make my wish come true.”

The second stage is activation by the element of Fire. First, light a candle. Pick up the runes and hold them over the light. And make a similar disclaimer.

At the third stage we use the power of the Earth. Pour a handful of salt onto each rune sign, and direct all your thoughts to what you have planned.

The last fourth stage - the runes are activated using the water element. Apply pre-prepared water to all objects and symbols. If you don't use all the water, you can use it to water indoor flowers or trees in your garden.

Remember an important rule: It is strictly forbidden to take water for the ceremony that has been blessed in the church.

How to activate runes with breath

This is probably the easiest and most accessible way. And also very fast. It is suitable for any person, but remember the main thing - this technique is used only in...

How to correctly activate runes using your own breath? Let's figure it out.

Place a rune, amulet or runic stave on your left palm and cover it with your right palm on top. Inhale as deeply as possible and exhale into the folded box from your hands. Mentally visualize everything you want to ask the symbols for.

If you wish, make a reservation during the procedure. For example, the following words would be suitable:

“I activate the runes so that my body can heal from an illness. I ask for protection from all evil spirits and other harmful entities."

Activating runes with blood

The following method is carried out in two cases:

to strengthen health and internal strength;
to cement the energetic union of the runic set and its owner.

If you are going to use runes for other purposes, it is better not to use blood activation - this is a very serious rite that has a number of consequences.

Prepare a sharp twig in advance (a regular toothpick or a sharpened match will do). Also, you cannot do without a knife with which you will need to make a cut. Blood is taken from the ring finger. Professional runologists cut the wrist, but it is better not to risk it - you can significantly damage the vein.

To protect yourself, wipe all items with alcohol.

This method will help those who want to know how to correctly apply runes on a photo and activate them. If you want to bring healing to a loved one, then draw symbols on his photograph and follow the instructions.

When you prick your finger and the first drop of blood appears, dip a wooden stick into it. And then draw a circle around the runes.

When the blood dries, you can wipe it off.

To enhance the magical effect, say the following phrase:

“I call on the runes to help me and make a sacrifice to them.”

How to deactivate runes?

The deactivation procedure is almost identical - the natural power of the elements is also used here.

Most often, magicians perform rituals with water - just hold the rune signs under a stream of water. Actions are supplemented with a reservation.

Deactivation by earth occurs as follows: the rune or rune stave is buried underground. Over time, the energy of nature takes away the power of the symbols and purifies them.

The fire element also cleanses everything in its path - hold the formula for a couple of minutes over burning flames.

Alena Golovina— white witch, master of Cosmoenergetics,author of the site

Interesting

You have studied the properties of runes, know what colors correspond to the symbols, and maybe your first rune set, which means that runes can now be activated. This means that you can activate the entire set or, in accordance with your goals, select the necessary rune or rune set and begin making and using the talisman in practice. Remember that in addition to proper manufacturing, the activation of runes is also important; only in this case can you expect their correct action.

Step-by-step instructions for activating and negotiating a rune set

If you are going to activate not a ready-made rune set, but a form or a formula, pay a little attention to their image. For the image, use the following media:

Paper. Despite its simplicity, it is a very unreliable option, since the slightest damage to the paper cannot be allowed: if it deteriorates (tears, becomes wrinkled), the magical properties will be impaired;
Printed photograph. This method is simpler than applying it to paper, but has the same unreliable properties.
Leather. A more suitable and reliable way is to use a piece of unwanted genuine leather. It is desirable that the color be natural or neutral.
Metal. A very reliable method that has great durability, but requires special tools and skills to apply runes.
Tree. The optimal carrier in our opinion: combines reliability and ease of operation. Just apply runic symbols to wooden blanks and the result is guaranteed. About

Advice: we do not recommend using carriers made of artificial materials (plastic, artificial leather, rubber, etc.): they will not be able to contain the full range of magical properties of runes, they will not be able to contain “living” energy.

We carry out reservation and activation

Disclaimer

If you are making a runic set or doing it yourself, make a reservation right during the manufacturing process. If you buy ready-made, make it immediately after purchase.

The rune clause is not complicated: just say out loud or silently the name of the rune. It is important that you concentrate and discard all unnecessary thoughts. Then your words will go clearly in the right direction and the rune will be activated correctly.

If the depicted symbol does not have strong energy, then it will not be able to release the information contained in it. Therefore, you need to charge (activate) it with a powerful energy flow. In practice, the activation of runes with 4 elements has worked well, which we will talk about below.

Air element

To begin with, discard all extraneous thoughts, try to reach your own energy flow.

Spend a few minutes meditating to help you concentrate better.
Now take a deep breath and exhale smoothly in the direction of the rune.
Imagine how your energy smoothly moves from you into the runes; activation in this way will enrich them not only with your energy, but also with the energy of the air.

Option 2. Activation with incense also applies to this element: take scented candles or sticks with a scent that is pleasant to you personally. Set it on fire and fumigate your set or amulet with the emanating smoke.

Fire element

The second element with which activation is carried out

When activating runes with fire, be careful so that your actions do not lead to a fire.

You need to take any natural wax candle;
Light it and let the flame settle;
Bring each runic symbol that you want to activate to the fire, but be careful that the fire does not damage the rune;
You can also take any metal object, heat it up and bring it to the rune in the same way. The effect will be exactly the same as that given by activating runes with fire.

You can also burn the spell runes drawn on the paper to activate the spell. This method is good to use if the effect of your runes was not intended to be long, but short. It is better to perform this action in nature, setting up an open fire; for this purpose, you can take a walk in the forest.

Earth element

The third element with which you can activate a ready-made rune pattern or set.

Take a small piece of fabric, the material must be natural, otherwise you will not be able to achieve the desired effect;
Wrap the finished amulet or the entire set in it;
Next, take a walk into the forest, grove, or field - the place should be natural and uncrowded;
Dig a small hole and place the package in it;
Leave it there for about a day and then dig it up;
The used fabric can be used for other stages: when activated by fire or water;

Advice: You should not bury the kit in the bag in which you will store it. The bag itself does not require activation, but if it gets dirty in the ground, it will be a shame.

Water element

The last element that will participate in activation

Find a body of natural “moving” water nearby. Suitable: river, lake, sea, stream, spring. Not suitable: lake, pond, artificial container, water flowing from a pipe.
Find a secluded place on the shore away from prying eyes.
Dip a rune or set wrapped in fabric into it (you can press it down with a stone) and leave it like that for a day.

Advice: If you use media such as paper and photography, they are not suitable for this action due to their unreliability.

The second way to activate runes with elements

If you want to plunge into the past and find out how runes were activated in ancient times, read carefully, because this method is somewhat more complicated than the previous one! The ritual will require items that are inextricably linked with the four elements: Fire, Water, Air and Earth.

Step one: preparation for the ritual

Container with clean water. The water must be from a natural source, so find the nearest bodies of water with running water;
Wax candle. The material is important: it must be wax (a church candle will also do);
Aroma sticks. It is important that you personally like their smell and satisfy your tastes;
Container with earth. Use only natural sources with good ecology: to do this, take a walk in the forest, go to the country, find the nearest field, grove;

You can activate runes with 4 elements at home if you prepare all the ingredients in advance.

The location of all four objects is extremely important; place them exactly in the corners of an imaginary square:

Place incense sticks in the upper right corner of the square;
Place a wax candle in the upper left corner;
Place a container with soil in the lower left corner;
In the lower right is a container with water.
Place the manufactured rune or the agreed upon set in the imaginary center of the square.

Step one: activation

For high-quality activation, fulfill the main condition - ensure complete silence. No sound should distract you from the ceremony.

1. Light a wax candle and incense sticks and say the spell:

“I call upon the powers of the four elements for help: Fire, Water, Air and Earth.”

While casting the spell, free yourself from all extraneous thoughts, imagine how the energy of the spoken words is directed towards the rune.

“I activate (name of the rune) with the power of the earth.”

3. Then bring the rune to the candle flame, to the incense sticks, repeating the spell one by one, changing only the element in your words. At the end of the action, dip the rune into a container of water, casting the appropriate spell, changing the necessary words.

Shutdown

Congratulations, you did it! Now concentrate on your internal energy, feel its power, its strong flow, free yourself from the burden of pressing thoughts. Taking a deep breath, apply the rune to your chest. Imagine how your energy fills it. Exhale and put the rune into a pre-made bag. The rune is activated and ready for practical use!